How to Deflate an Air Mattress?

0
111
How to Deflate an Air Mattress
How to Deflate an Air Mattress

An air mattress is a great way to sleep comfortably on the go, but what happens when it’s time to pack up and go home? If you don’t know how to deflate an air mattress, all of the air will rush out in seconds, leaving you with a deflated mess. In this article, we’ll show you how to deflate an air mattress so you can avoid any disasters.

Inflating an air mattress is easy, but what do you do when it’s time to deflate it? It’s not as easy as just letting the air out. You need to take a few extra steps to ensure the mattress is completely deflated.

If you are looking for effective tips how to deflate an air mattress, then you’ve come to the right place. There are actually quite a few easy tricks that can help you do this. This article goes over some of the best methods so you can get started right away! Check out more great ideas below! Can’t find what you’re looking for? Let us help you.

Most people usually say that it is easy to deflate an air mattress than inflate.

How to Deflate an Air Mattress?

Air mattresses are a convenient way to have a bed when camping or having guests and don’t want to pull out your regular mattress. However, sometimes they can be a little too bouncy for comfort. If you need to deflate your air mattress, there are a few ways to do it.

The air mattress is a staple of the traveling world. It is easy to set up, comfortable to sleep on, and deflated for storage in a reasonable amount of time. Air mattresses can be two types: 

  1. With internal pumps 
  2. Without internal pumps 

The type you need depends on your needs, but either option is viable as long as they are inflated properly before use!

Try to remember when deflating an air mattress is to use your hands. Placing it in a bag and rolling it up will only make the process more difficult. If you’re looking for tips on how to deflate an air mattress, this article provides some helpful advice!

The most convenient way to sleep comfortably at home or on an adventure is by getting an air mattress. The uses, popularity and demand have been increasing since it was introduced in the market. Are you looking for effective tips on how to deflate an air mattress or an embark air bed? Most people usually say that it is easy to deflate an air mattress than inflate an air mattress, but in my dictionary, both need understanding instructions. You can not only open the valve of an air mattress and extract the air just in seconds or a few minutes.

The deflation of an air mattress requires a set of instructions and techniques. Before discussing deflating air from the air mattress, we need to prepare the air mattress for the deflation of air. In this section, we will also know how to prepare your air mattress for deflation exactly.

How to Deflate an Air Mattress

Prepare Your Mattress for Deflation

A good night’s sleep is a luxury that many people take for granted, but the truth is that it can be tough to get enough of them. We all have different reasons for not getting enough restful sleep, including stress, anxiety and exhaustion. Fortunately, there are ways to ensure you’re getting the most out of your mattress by preparing it ahead of time before sleeping on it with these tips! 

If you’ve just purchased a new mattress or if your old one needs replacing, then this article will give you some helpful advice about how to prepare your new bed so that you don’t wake up feeling sore in the morning.

You need to take your air mattress and keep it on the floor, but before that, make sure there will be anything that can cause a puncture to the air mattress. Once you are sure about that and keep the mattress on the floor, then start the process.

Many air mattresses often come with how to deflate an air mattress to inflate and deflate the air. So let’s talk about how to deflate an air mattress with and without how to deflate an air mattress; we will also tell other methods to extract air from the air mattress.

If you want to know about that and want to apply this to your product, read the whole article.

How to deflate an air mattress using a built-in pump?

When you buy an air mattress, using the best pump for your inflatable bed is important. After all, if it doesn’t hold any air, what’s the point? After reading this section you’ll know how to deflate and inflate an air mattress using a built-in pump. It is very simple and effective! Try to do this with virtually any type of electric or battery-operated pump that comes with your product too.

If you are looking for a way to deflate an air mattress using the built-in pump, this article is definitely for you. You can easily get rid of your bulky hand or foot pump and save space by getting one that’s built into the mattress itself. Also, it’ll be easier to use since there won’t be any need to attach hoses or carry around heavy pumps! So, let’s get started with our top 3 picks on how to deflate an air mattress using a built-in pump in no time.

If you have a built-in pump with your air mattress, I will consider you the lucky person. With the use of a built-in pump, you don’t need to worry about extracting air from the mattress. Every air mattress contains a button for deflation of air, and the “deflate” sign indicates the button.

  • The button is located on the backside of the deflating dial. 
  • All you need to do is to flip the deflate dial and press the button. 
  • An air mattress consists of an internal pump, which sucks the air completely to deflate your air mattress.

This process will take a maximum of 5 minutes. It is the easiest process to deflate air, but it requires a built-in pimp.

  • Turn the mattress on its side and remove the valve cap.
  • Insert a needle or pin into the air hole to release air until it’s deflated
  • Replace the valve cap when finished
  • Shake out any excess water from your mattress before storing it in a dry place for next use
  • Take care of your mattresses by using them only once every few months, rotating them regularly, and flipping them occasionally so that they wear evenly.

Now you might think that what if you have not got a built-in pump? To have answered this question, please read the remaining article below.

How to deflate an air mattress without using a built-in pump

Many air mattresses do not have a built-in pump, so they cannot deflate the mattress. If you want to get rid of your air mattress but don’t know how to deflate it, there are some things that you can try before calling a professional. In this section, I will go over three different ways to get rid of that pesky air bed and go back to sleep on solid ground.

So, how do you deflate an air mattress without using a built-in pump? Here are three methods that should work:

1. Use a vacuum cleaner to suck the air away from a regular opening

2. Drive over it with a car to pop the inner baffles and let the air out slowly through holes in the bottom

3. Flatten it out, fold it up and put it in a bag to let the air out slowly over a period of time

1. Use a vacuum cleaner to suck the air away from a regular opening

To use this method, you will need a vacuum cleaner that is strong enough to suck all of the air out of an air mattress quickly. This can be difficult if you have an older model with less suction; on the other hand, some new powerful models will do the job just fine. You might want to pick up some plastic bags or trash bags first because many vacuums do not come with any accessories for storage–and storing your deflated mattress inside of your vacuum isn’t very convenient (it also makes a mess). Once you have all of the supplies you need, follow these steps:

  • First, prepare your vacuum cleaner for use and make sure there is a bag inside of it to catch the contents (or make sure that the hose attachment is on tightly and doesn’t work loose when in use)
  • Begin vacuuming and try to suck all of the air out
  • When finished closing off any opening with your hand or foot until all of the air is gone
  • Pop off any outer covering that might be around the opening area if possible
  • Remove whatever accessories (such as a hose or extension cord) you used.
  • Place some weight over the top of the hole so it can’t refill
  • Replace outer coverings

2. Drive over it with a car to pop the inner baffles and let the air out slowly through holes in the bottom

Driving over your mattress will likely damage it, but after you do this, there will be dozens of holes that are perfect for letting all of the air out of your mattress. This trick is effective if you don’t want to deal with trying to catch all of the mattress’s contents; just spray some cooking oil on both sides (or vacuum it off) and let gravity take care of things. Here are step-by-step instructions:

  • Slowly drive over your mattress using first gear only.
  • If you have an old car without shocks, this may not work because there will be too much vibration–if you have a newer vehicle with good shocks, this method should work just fine.
  • Continue driving back and forth with even pressure until all of the air is gone.
  • Let the mattress sit for about 15 minutes–it will deflate quickly on its own

3. Flatten it out, fold it up and put it in a bag to let the air out slowly over a period of time

This method works very well if you don’t want to risk any damage by using one of the other methods or haven’t found your built-in pump yet. Here are some step-by-step instructions:

  • Lie down on your mattress
  • Fold your mattress in half lengthwise
  • Fold width-wise (the opposite way) again
  • Tightly roll it up
  • Secure with a bungee cord if possible
  • Place in a bag
  • Let the air out over the course of 12-24 hours

Before starting to answer the previous question, think about what an internal pump does?

It sucks the air.

So, now ask yourself; do you have any pumps, which sucks the air and extract air from your air mattress? 

If yes, then trust me, you are in business. Pumps other than build-in pumps are called external pumps. These pumps do the same job as the internal pump does. Since each air mattress comes with two nozzles, one has a narrow mouth opening, and the other has a wide mouth opening.

A narrow mouth opening nozzle is used to inflate air into the air mattress, while a wide mouth opening nozzle is used to deflate air from the air mattress. You will connect the wide mouth opening nozzle to the external pump, which sucks the air to extract air from your air mattress.

You will switch the button-on, which sucks the air. It would be best if you also held the external pump to be sure that your external pump is connected with the air mattress.

The more pressure you apply to an external pump, the quicker the pump will extract air from the air mattress.

But what if you don’t have an internal pump nor an external pump? Is there any other method that you can use to extract air from the air mattress? To know the answer, here are other tricks…

Deflate air from air mattress Using Body pressure

This method is employed when you have nothing around to extract air from the air mattress. If you get stuck in that situation, you don’t need to get worried about this; still, you can extract air within 10-15 minutes by applying your body pressure.

Initially, you will take your mattress and put the mattress on the floor. Open the wide mouth opening nozzle and apply pressure on the mattress.

You often use this method at beaches or at picnics, where you have nothing with you. In this method, you will exert pressure on the air mattress through your hands, elbow, or knee.

You need to continue that process for up to 10-15 minutes. Once you think there will be no air inside the air mattress, close the nozzle, fold it, and put the air mattress in your bag.

Deflate air from air mattress using the Foot Pump

Except for the methods explained above, there is another effective method to deflate air from the air mattress.

Yes, you are right. 

Similar to the inflate, you can also deflate the air from an air mattress by using a foot pump or electrical pump. You need to put a nozzle inside of the valve so that it can suck all the air when you switch it on.

You can also make this process faster by applying pressure to different places to suck the air properly. Once you are done with the process, you can take the air mattress, fold it and pack it.

Conclusion:

We have described almost all the methods to deflate air from the air mattress. It can surely help you if you apply these processes practically. In this article, we have mentioned various methods to deflate air from the air mattress. The easiest method is to use the built-in pump.

However, you cannot use a build-in mattress outside, so you need to buy an electric pump or have some techniques to deflate air from the air mattress. You can also read about how to blow up an air mattress?

We have also mentioned some of the techniques to deflate air without using build-in and external pumps. We are so thankful to you for reading this article. If you like the article and want to take benefit from it, then apply these methods for your air mattress.

LEAVE A REPLY

Please enter your comment!
Please enter your name here